Type:
Extruder
Version:
4.3
Status:
Tested
License
CERN Open Source Hardware License
Authors
Type
Single Screw
Weight
110 kg
Power (W)
5 kW
Voltage
380V or 220V
Amperage
16A
Input Flake Size
Small
Screw diameter
30mm
Length of screw (mm)
900 mm
Effective screw length
600 mm
Rated Motor Power
3 kW
Motor
- Rated Motor output Torque
109 Nm
- Rated Motor output speed
263 RPM
- Heating zones
3
Heating power: max.
2 kW
Part Nr. | Description | Configuration |
---|---|---|
1 | Extrusion Hopper | Stainless 2mm |
2 | Screw Shield | Stainless 2mm |
3 | Heatbands | 7x 300W Brass |
4 | Screw & Shield Support Mount | |
5 | Nozzle | |
6 | Motor | 1480RPM | 3Kw | Supports 220V | 380V |
7 | Reducer | 1:10 |
8 | Motor Flange | 160mm diameter | 8x M10 bolts |
9 | Barrel Flange | 100mm diameter | 8x M8 bolts |
10 | Bearing Housing | |
11 | Extrusion Screw | 30mm diameter |
12 | Power Switch Motor | Contactor |
13 | Emergency Switch | |
14 | VFD Panel | |
15 | Feed Zone PID (Temperatur Controller) | Inkbird 100 VH |
16 | Mixing Zone PID (Temperatur Controller) | Inkbird 100 VH |
17 | Nozzle Zone PID (Temperatur Controller) | Inkbird 100 VH |
18 | Power Switch Heating | Contactor |
19 | Direction Switch | |
20 | Baseplate | 80cm x 15mm x 200mm |